-
Stainless Steel Pressure Regulator
-
Back Pressure Regulating Valve
-
Changeover Manifold
-
Brass Pressure Regulator
-
Stainless Steel Tube Fittings
-
Air Compressor Check Valve
-
Stainless Steel Ball Valve
-
Water Solenoid Valve
-
Stainless Steel Needle Valve
-
Gas Solenoid Valve
-
Stainless Steel Diaphragm Valve
-
Gas Flow Meter
-
Flexible Hose Tubing
-
Pneumatic Pressure Control Valve
-
Gas Pressure Test Gauge
-
Medical Oxygen Regulator
-
Dariof FassiniAll perfect. Quality is 4.5 on 5 but quality to price ratio is excellent.
-
Jasper MokkinkI have had an great experience ordering from Wolfy! The communication was always quick and clear. Adding parts to your order after you made your payment is also accepted by Wolfy. They are also willing to hold your order for a little bit if you need time to decide what additional parts you would like to add. I ordered compression fittings.
3/4inch High Purity Gas Pressure Regulator Valve Stainless Steel For Laboratory
Contact me for free samples and coupons.
WhatsApp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xProduct Name | R13 Pressure Regulator | Material | Stainless Steel |
---|---|---|---|
Application | Industry, Laboratory | Suitable Gas | Inert And Corrosive Gases |
Inlet And Outlet Connection | 3/4"NPTF | CV | 1.8 |
MOQ | 1 Pcs | ||
High Light | High Purity Gas Pressure Regulator Valve,1.8 CV Gas Pressure Regulator Valve,Inert Gas Pressure Regulator Valve |
Features
1. Single stage diaphragm structure
2. The corrugated diaphragm design has excellent sensitivity
3. It can be used for corrosive and toxic gases
4. Install a 20 micron filter element at the inlet
5. Oxygen environment application options are available
Technical Parameter
1. Maximum inlet pressure: 500psig
2. Outlet pressure range: 0~15,0 · 30,0~75,0~150
3. Materials of internal components:
Valve seat: PCTFE
Diaphragm: Hastelloy
Filter element: 316L
4. Working temperature: -40 ℃ ~+74 ℃ (-40 ℉~+165 ℉)
5. Leakage rate (helium):
Inside: no visible bubbles
External: ≤ 1x10-9mbar l/s
Ordering Information
R13 | L | B | E | H | G | 04 | 04 | P |
Item |
Body Materia |
Body hole |
Inlet pressure |
Outlet pressure | Pressure gauge | Inlet size | Outlet size | Options |
R13 | L:316 | A | E:1500psi | H:0~125psig | G:MPa gauge | 04:1/2”NPT(F) | 04:1/2”NPT(F) | P:Panel mounting |
B:Brass | B | F:500psi | J:0~75psig | P:Psig/bar gauge | 05:1/2”NPT(M) | 05:1/2”NPT(M) | R:With relief valve | |
D | L:0~25psig | W:No gauge | 06:3/4”NPT(F) | 06:3/4”NPT(F) | ||||
G | M:0~15psig | 13:1/2”OD | 13:1/2”OD | |||||
J | 14:3/4”OD | 14:3/4”OD | ||||||
M | Other type is available | Other type is available |
Installation instructions and precautions of pressure reducing valve
1.It is not recommended to use thread sealant or liquid raw material tape for NPT thread installation. Improper operation will easily cause liquid to flow to the filter element in the valve and cause the filter element to be blocked. Finally, there is no pressure at the valve outlet or the flow is too low | 2.The filter must be installed upstream of the pressure reducing valve, otherwise the system particles will damage the valve seat,resulting in internal leakage of the pressure regulator, downstream pressure rise, and easy damage to the outlet pressure gauge or other equipment. It is recommended to use a filter element with a precision of not less than 20 microns | 3.Before installing the pressure reducing valve, the pipeline must be cleaned, and the gas should be used for continuous purging to thoroughly clear the magazines and particles such as iron filings when cutting the pipeline; |
4.In the flow state, turn the handle clockwise to increase the outlet pressure and counterclockwise to decrease the outlet pressure. When the outlet pressure is reduced to zero, the handle of the pressure reducing valve should be in a loose state. Excessive counterclockwise rotation of the handle may cause the thread to get stuck, or the handle is loose and cannot be adjusted again
5.It is not recommended to use the pressure reducing valve as a stop valve for a long time, otherwise the valve seat may be deformed, resulting in unstable flow
6.Handle with care to avoid any impact, especially the pressure reducing valve with pressure gauge. The pressure gauge is a sensitive element and may be damaged by external force
Company Profile
WOFLY is a leading Manufacturer, Supplier and Exporter of a wide range of gas equipements, available under the brand name AFK. Wofly's success yields from high-quality, innovative products, exceptional customer service, and unequaled technical expertise in the gas& oil industry.
WOFLY offers an extensive line of components including tube fittings, control valves, shut-off and solenoid valves, pressure relief and regulators.Through the years we have learned how to properly match the gas regulation equipment with the application. Using the proper equipment for the job eliminates problems such as contamination, pressure variances, safety issues, and equipment mismatch.